SE-FP Series Flexible bone probe

•Bend the probe by hand and point it at the workpiece (the bending radius is not less than 10mm). It is recommended that the distance between the end of the probe and the

workpiece is 2-50mm.

•When the probe is too long, it can be cut with scissors. For the cut probe, the illuminance may attenuate and affect the detection distance. At this time, it should be corrected by

secondary trimming or adjusting the trigger threshold of the fiber amplifier.

•Black and transparent workpieces will produce a lower diffuse reflection light value. The distance from the end of the probe to the workpiece should be appropriately shortened.

Instructions for Use：

Difference from ordinary：

Crop Tutorial：