Soft Beak

Soft robotic Gripper Beak B-4G64[H]/S

Soft robotic Gripper Beak B-4G64[H]/S

This soft gripper has a clamping force of (0-20N) and a clamping range of (28-50mm), and the recommended load is 0-1800g.

Learn More
Soft Beak B-20802[P]

Soft Beak B-20802[P]

It can be installed in the straight inlet connection module [CM] series or the side inlet flange connection module [FCM] series You can choose straight or side type Fingertip open under positive pressure and clamped under negative pressure. It is suggested to be used with Rochu controller. Fingertip distance G can be adjusted by working positive pressure Beak B-20802[P] can be replaced separately

Learn More
Soft Beak B-4B18[P]/S

Soft Beak B-4B18[P]/S

Replaceable Open in positive pressure, grab in vacuum Adjust the fingertip distance G by adjusting the air pressure. It can be used as clamp or spread in hole

Learn More
Soft Beak BM-20005V[P]

Soft Beak BM-20005V[P]

Replaceable Open in positive pressure, grab in vacuum Adjust the fingertip distance G by adjusting the air pressure. It can be used as clamp or spread in hole

Learn More
Soft Beak B-20006[P]

Soft Beak B-20006[P]

It can be installed in the straight inlet connection module [CM] series or the side inlet flange connection module [FCM] series • You can choose straight or side type • Fingertip open under positive pressure and clamped under negative pressure. It is suggested to be used with Rochu controller. Fingertip distance G can be adjusted by working positive pressure • Beak B-20006[P] can be replaced separately

Learn More
Soft Beak B-21608[P]

Soft Beak B-21608[P]

Suit for fabric industry Replaceable for other soft beak model such as B-20006,B-2B etc.

Learn More
Soft Beak B-3B18[P]/S

Soft Beak B-3B18[P]/S

It can be installed in the straight inlet connection module [CM] series or the side inlet flange connection module [FCM] series You can choose straight or side type Fingertip open under positive pressure and clamped under negative pressure. It is suggested to be used with Rochu controller. Fingertip distance D can be adjusted by working positive pressure Beak B-3B18[P]/S can be replaced separately

Learn More
Soft Beak B-3B14[P]/S

Soft Beak B-3B14[P]/S

can be used to pick the soft breathable fabric layers. pick only the first layer from multi-layers.

Learn More
Soft Beak B-3B10[H]/S

Soft Beak B-3B10[H]/S

It can be installed in the straight inlet connection module [CM] series or the side inlet flange connection module [FCM] series You can choose straight or side type Fingertip open under positive pressure and clamped under negative pressure. It is suggested to be used with Rochu controller. Fingertip distance D can be adjusted by working positive pressure Beak B-3B10[H]/S can be replaced separately

Learn More